How to Prevent Plumbing Clogs

Plumbers install, repair, and maintain the piping and fixtures that provide water, gas, and waste disposal in residential and commercial settings. They also ensure that plumbing systems comply with local building codes and regulations. Contact Plumbers Spring TX for professional help.


The path to becoming a plumber starts with earning a high school diploma or equivalent. You can then attend trade or technical schools to learn the skills needed for the job. You can also pursue an apprenticeship to gain hands-on experience in the field.

Keeping your drains clean is essential to maintain the proper function of your home’s plumbing system. Over time, it is normal for a buildup of hair, soap residue, grease, and other debris to cause clogged drains. Taking steps to prevent these clogs can help you avoid costly repairs in the future.

Many people attempt to use home remedies like pouring hot water down the drain or using a chemical drain cleaner. However, these often only mask the symptom rather than fix the problem. Instead, you should call a plumber to ensure that your pipes are fully cleaned and unclogged.

Plumbing professionals can use specialized tools to clear even the most stubborn clogs. They can also identify the source of the clog and suggest ways to prevent it from happening in the future.

Clogged drains are a serious hygienic concern for any home or business. They can lead to sewage overflow and cause health issues for anyone who lives or works in the building. If you notice a foul odor coming from your drains, it’s important to call a plumber as soon as possible to diagnose and treat the problem.

Regular drain cleaning is one of the best things you can do for your plumbing system. It prevents clogs, slow drains, and can even eliminate foul odors in your home. It’s a small investment that can save you thousands in repair costs down the road.

While you can perform some drain cleaning tasks at home, hiring a plumber is usually the best option. Homeowners may try to save money by performing these tasks themselves, but they often end up pushing the clog deeper into the pipe or causing more damage to their pipes. A skilled plumber can clean your drains thoroughly and efficiently, saving you time and money in the long run.

If you’re worried about clogged drains, contact us online to schedule a drain cleaning service today. We offer quality plumbing solutions at a fair price. We can also handle any other residential or commercial plumbing needs you may have. We look forward to hearing from you!

Clogged Toilets

If a toilet is constantly getting clogged you’ll need to figure out why that’s happening and get it fixed as soon as possible. Constant clogs cause problems with your home’s plumbing system and can damage the drain line and sewer line over time, leading to expensive repairs.

One common reason that toilets continually clog is that non-flushable items are making their way into the drains. This includes wipes, paper towels, and even Q-tips and cotton balls. Unless the packaging clearly states that these items can be flushed they belong in the trash, not the toilet. This is especially important in households with young children, who are curious about what goes into the drains and can accidentally flush these types of items.

To avoid these common causes of clogged toilets, consider installing a garbage disposal. They can help cut down on food scraps and other unwanted materials that could make their way into the drain lines. You should also talk to kids in your home about what can and cannot go into the toilet, and keep wastebaskets nearby so personal care items can be discarded properly.

Another solution to prevent frequent clogs is a simple plunger. The type of plunger that is recommended for use in a toilet is a flange plunger, as this allows it to better dislodge blockages from the toilet. To use the plunger, first make sure that there is water in the bowl – a little bit of water will help to push up and dislodge any hair or other debris that is creating the clog.

If plunging doesn’t work, a plumber will likely recommend using a chemical clog remover. If you’re uncomfortable pouring something so strong down the drain, try boiling water – it can sometimes break up and dissolve a clog. If these solutions don’t work, you may have a major clog that needs professional attention.

If a clog continues to occur on a regular basis, you might need to have a plumber install a toilet auger. This tool is inserted into the drain and uses a rotating head to break up and dislodge clogs. If you’ve been dealing with constant clogs, it’s also worth considering having your sewer line checked out by a plumber. They can inspect and repair or replace your drain and sewer lines if needed, to prevent future issues from occurring.

Clogged Sinks

Sinks are often the first thing in a home to get clogged with hair, grease, soap scum and food particles. If your sink is draining slowly or not at all, it’s time to call a plumber. But before you do, there are some things you can try yourself.

Kitchen sink drains clog when cooking grease and oil cake onto the walls of the drainpipe. Add in detergent soap scum and un-dissolved food pieces, and you have a recipe for a gunky clog that’s hard to dislodge.

If you have a garbage disposal, run it to grind up any food scraps and see if that fixes the problem. If not, you’ll want to try using a plunger (assuming it’s still in good condition). Use it as if you were brushing your teeth, and be sure to form a seal around the drain opening. Repeat this process several times, making sure to check in between plunges if the clog has moved.

For bathroom sinks, the most common cause of a clog is hair. This can also happen if children or pets flush toys down the drain. If your clog is caused by hair, you can usually dislodge it by first removing the drain stopper and pivot rod from the bottom of the sink. Next, open the P-trap — the curved part of the pipe under the sink that connects to the vertical and horizontal drain pipes. Loosen the fasteners holding it on, then remove it and fish out any hair and gunk that’s caught in there. You can also use a coat hanger to push any mass up through the trap and out of the drain hole.

Boiling water is another quick and cheap way to clear most sink clogs. Just make sure your pipes are rated for boiling temperatures, and don’t pour the water directly into a porcelain sink; the heat can crack it. Pour about half a pot of boiling water down your sink drain, and then wait a few minutes to see if it’s unclogged. If not, move on to a more powerful method.

Clogged Showers

Shower drains can get clogged with hair, soap scum, and other debris that can cause water to back up into the tub. When this occurs, it can cause water to pool and become stagnant, which encourages bacteria growth.

One of the first signs that you have a clogged shower drain is when water begins to take longer than usual to drain from the tub. This is because the clog is restricting the flow of water through the pipe, forcing it to take longer than normal to reach the overflow drain. Another common sign of a blocked shower is when you notice a foul smell coming from the overflow drain. This is because the clog has caused rotting from trapped dead hair and soap scum.

If you’re unable to unclog your shower using a plunger or other mechanical methods, it may be time to call in a plumber for help. Professional plumbers have tools that can break up and remove even the most stubborn of clogs. They can also use a camera to examine your pipes and determine what the problem is.

Chemical drain cleaning products can be effective at removing a clog, but they should only be used as a last resort. They can be very harsh on your pipes and can cause damage if used improperly.

A natural and safe alternative to chemical cleaners is a mixture of baking soda and vinegar. The chemical reaction created by this simple solution can break up and dislodge a blockage in your shower drain. To try this, simply pour a cup of baking soda down your shower drain followed by a cup of distilled white vinegar. Cover the drain with a plug or stopper, and allow the mixture to bubble for about 30 minutes. Once the bubbling has stopped, slowly pour boiling water down the drain to flush away any remaining clog material.

You can prevent shower drain clogs by regularly using a hair catcher or drain screen, and by removing any hair that you see floating in the tub water. It’s also a good idea to regularly boil some water and pour it down your shower drains to keep them clear of hair and soap scum.


Is It Time For Water Heater Replacement?

Water heaters can last up to 10 years on average. If yours is older than that or displaying signs of trouble, it’s time to consider replacing it. Contact Water Heater Replacement Denver for professional help.

Water Heater

Leaks could signal a broken heating element or thermostat. Other causes include short back-to-back uses of hot water, which can cause a condition called stacking.

A water heater is an essential part of a home, but it can be dangerous to install. This is a project best left to professionals, who can ensure the job is done correctly and in accordance with local plumbing codes. A professional installation will include the cost of a new water heater, any required plumbing work and gas or electricity hookups. The size of the water heater, installation location and any additional upgrades will also impact costs.

A typical electric water heater uses an element and a control panel to generate hot water. The water flows through a pipe from the home’s main shutoff valve to the heater. The element heats the water to produce steam, which then falls back into the tank or flows out through a vent pipe. Gas water heaters use a natural or propane gas to power the burners that heat the water, but the process is more complex and expensive than with electric models.

The first step in a water heater replacement or installation is to drain the old unit. Open a hot water faucet and let it run until the temperature is cool, which typically takes 10 minutes or more. This helps reduce the risk of scalding and can make it easier to remove the old unit.

Before beginning any work, turn off the electricity to the water heater at the breaker or fuse box. If the water heater is gas, turn off the gas at the control valve on the water heater. Remove the cover from the junction box at the top of the water heater to expose the wire connectors and cable clamp. Use a wrench to loosen the wire connectors, then disconnect the wires from the terminals on the water heater.

Removing the old water heater will reveal a copper, iron or steel discharge pipe that connects to the bottom of the tank. If the pipe is cracked or damaged, it will need to be replaced. This is an excellent opportunity to consider replacing it with a flexible tubing kit, which will provide a smoother, safer and more reliable connection.


Water heater maintenance can help your facility avoid a variety of costly problems. Some of these issues include water leaks, which can cause serious damage to the surrounding area and reduce productivity. Others include a foul odor, which may indicate excess corrosion that can affect production, as well as low water pressure, which can slow production. Fortunately, there are several easy and inexpensive ways to keep your water heater in good working order.

Some of these measures, like adding insulation and setting the temperature, have to be done only once, while others, such as flushing the tank and checking the anode rod, should be performed at least every six months. Additionally, you should also check the temperature and pressure relief valve (T&P Valve) on gas or electric units annually to make sure that it is functioning properly.

The T&P Valve is designed to release water if the pressure inside the tank gets too high, which can protect your unit from exploding and causing expensive damage. You can test it by placing a bucket under the discharge pipe and opening it to allow water to drain for a few seconds. If the water drains and stops, the T&P Valve is operating correctly.

Another important water heater maintenance task is to inspect the unit for signs of corrosion, which can be very expensive. You should do this at least once a year, and make sure to shut off the power to the unit before beginning any inspections or maintenance work. Additionally, you should make sure that the water heater is cool before doing any close inspections to prevent scalding burns.

You should also test the anode rod on a gas or electric water heater by putting a bucket underneath the discharge pipe and loosening the hex head to pull the rod out to examine it. If the rod is corroded, you should replace it. The anode rod attracts sediment and keeps it from corroding the water heater, protecting the unit.

You should also check the water temperature on an electric or gas water heater, which is best set around 120 degrees Fahrenheit to help lower energy bills and protect the unit. Lastly, you should drain and clean the water heater at least once per year. You can do this by cutting off the power and gas or extinguishing the pilot light on a gas water heater, turning off the cold-water inlet and drain valve, and using a garden hose to drain about 10 percent of the hot-water capacity.


Your water heater works hard to keep your home supplied with a constant supply of hot water for showers, dishes, laundry and more. But like all major appliances, it can eventually run into trouble. The good news is, if you have the right tools and a little know-how, some of these problems are fairly easy to diagnose and repair.

If your water heater is making a loud or gurgling noise, it could be due to sediment buildup that has settled in the bottom of the tank. If this is the case, it will need to be flushed. The process involves shutting off the power to the unit, turning off the water supply, and removing the water heater drain valve. This can be done by hand or using a special pump that will remove the sediment and flush out the tank, allowing you to restore your hot water.

In some cases, a leaking water heater can be repaired simply by replacing the pressure relief valve. This is a job for a professional, but one that can be relatively inexpensive and is a relatively simple task for any plumber to perform.

A faulty thermocouple can prevent gas from entering the heater, which will also stop your pilot light from staying lit. You can replace this part yourself if you have a gas model, but if your water heater is electric, you will need to contact a qualified electrician to do so.

If you notice that your water has a reddish color to it, this is a sign of rust inside the tank and can be quite dangerous if not addressed quickly. Again, this is a problem that should only be handled by a certified professional and will likely require replacement of the entire unit.

If you are experiencing consistent hot water shortages, it may be a sign that your unit is undersized for the size of your home and family. Replacing this with a larger model should resolve the issue. Alternatively, you may be experiencing an upper or lower thermostat problem that can often be fixed by resetting the temperature dials.


When a water heater has reached the end of its useful life or is constantly experiencing problems, it may be time to consider replacing it. Replacing a water heater is usually much cheaper than repairing one. However, there are several things to keep in mind when determining if it makes sense to repair or replace your water heater.

It’s important to have a proper tank size for your household. If you consistently experience cold showers or your family doesn’t have enough hot water, it could mean your tank is undersized. If you want to save money on utility bills, you can upgrade to a more energy-efficient model.

You’ll also want to consider the location of your new water heater. A natural gas water heater typically requires a vent pipe, while an electric unit needs a dedicated 240-volt electrical connection. If your home’s main electricity supply comes from solar panels, you might want to install a tankless water heater that uses power from the sun to heat your water.

If you have a water heater that has been in your home for more than 15 years, it’s probably time to consider replacing it. Older models are less energy-efficient and more susceptible to leaks, which can be costly.

In the simplest replacement, a pro swaps your old water heater for a similar model. This avoids additional installation costs, such as installing new plumbing and electric wiring. If you’re looking to save money, you can also choose a smaller capacity or upgrade to a tankless unit.

During the replacement, you’ll have to disconnect your current water heater and drain it. You’ll also need to remove the dip tube, which is used to measure the temperature of the water inside the tank. If your dip tube is corroded or damaged, it’s important to replace it before it causes damage. This is a job most homeowners can do themselves, but if you’re not comfortable with it, you can hire a plumber. An anode rod is another essential maintenance item that should be replaced every five years. This is made of magnesium or aluminum with a steel core, and it helps retard corrosion in the tank.